How To Install Startimes And Gotv on One Cable
This post is about installing both Startimes and Gotv on a single coaxial cable.
When it comes to this kind of connections, you will need a tool that will enable you to get the signal together.
There’s a tool called diplexer or signal combiner, which is capable of combining both the satellite and antenna signal and splitting them as well.
The diplexer comes with three different ports, the IN/OUT port, Satellite Port (SAT) and Antenna Port (ANT).
The Startimes satellite signal have to be connected to the SAT port on the signal combiner and the Gotv cable to the ANT port respectively.
Connect a cable from the IN/OUT port to the decoder location, where you’ll need another diplexer to split the signal and share it to each decoder respectively.
THE VIDEO BELOW ILLUSTRATES HOW TO INSTALL STARTIMES AND GOTV ON 1 CABLE;
To install a GOtv decoder, follow the steps below:
- Unpack the decoder: Once you have purchased the GOtv decoder, unpack it from the box and check if it contains all the necessary accessories.
- Connect the decoder to your TV: Use an HDMI cable to connect the GOtv decoder to your TV. Alternatively, you can use the RCA cables that come with the decoder.
- Connect the antenna to the decoder: Connect the GOtv antenna to the decoder using the cable that comes with it.
- Power up the decoder: Connect the power cable to the GOtv decoder and plug it into an electrical outlet.
- Activate your decoder: You can activate your GOtv decoder by following the instructions in the manual or by visiting the GOtv website. You will need to provide your decoder serial number, which can be found on the decoder.
- Scan for channels: After activating your decoder, you will need to scan for channels. This can be done by following the instructions in the manual.
To install a Startimes decoder, you will need to follow the following steps:
- Purchase a Startimes decoder: You can buy a Startimes decoder from any authorized Startimes dealer or their online store.
- Unpack the decoder: Once you have bought the decoder, unpack it from the box and check if it contains all the necessary accessories.
- Connect the decoder to your TV: Use an HDMI cable to connect the Startimes decoder to your TV. Alternatively, you can use the AV cables that come with the decoder.
- Connect the antenna to the decoder: Connect the Startimes antenna to the decoder using the cable that comes with it.
- Power up the decoder: Connect the power cable to the Startimes decoder and plug it into an electrical outlet.
- Activate your decoder: You can activate your Startimes decoder by following the instructions in the manual or by visiting the Startimes website. You will need to provide your decoder serial number, which can be found on the decoder.
- Scan for channels: After activating your decoder, you will need to scan for channels. This can be done by following the instructions in the manual.
