How To Scan SuperBox Decoder
THE VIDEO BELOW ILLUSTRATES HOW TO SCAN SUPERBOX DECODER :
https://youtu.be/G8WT2NhGPRs
satellite receiver
To scan your SuperBox decoder for channels, follow these steps. These steps are general guidelines, as the exact process might vary depending on the specific model of your SuperBox decoder:
Step-by-Step Guide to Scan Channels on SuperBox Decoder:
1. **Power On the Device**:
– Make sure your SuperBox decoder is plugged in and connected to your TV.
– Turn on both the TV and the SuperBox decoder.
2. **Access the Main Menu**:
– Using the remote control that came with your SuperBox, press the ‘Menu’ button to access the main menu.
3. **Navigate to the Settings**:
– Within the main menu, find and select the ‘Settings’ option. This is typically represented by a gear icon.
4. **Find the Channel Setup/Scan Option**:
– In the settings menu, look for options related to ‘Channel Setup’, ‘Channel Scan’, or ‘Auto Scan’. This could be under a sub-menu such as ‘TV Settings’, ‘Channel Management’, or similar.
5. **Choose the Scan Type**:
– Select the type of scan you want to perform. Common options include:
– **Auto Scan**: Scans for all available channels automatically.
– **Manual Scan**: Allows you to enter specific frequencies or parameters to scan particular channels.
6. **Start the Scan**:
– Initiate the scanning process by selecting ‘Start’, ‘Begin Scan’, or a similar option. The decoder will start searching for available channels.
7. **Wait for the Scan to Complete**:
– The scanning process may take a few minutes. The decoder will display the progress and list the channels found.
8. **Save the Channels**:
– Once the scan is complete, save the list of channels. This may be done automatically, or you might have to confirm or save manually.
9. **Exit the Menu**:
– Exit the settings menu and return to the main screen. You should now be able to browse the newly found channels.
10. **Troubleshoot If Necessary**:
– If no channels are found or the list is incomplete, ensure your antenna or cable connection is secure and try scanning again. You might also check if there are any firmware updates available for your SuperBox that could improve scanning performance.
