How To Reset ReScan SuperBox Decoder To Get Back Missing Channels
The Video Below Illustrates How To Reset ReScan SuperBox Decoder To Get Back Missing Channels :
To reset and rescan your ReScan SuperBox decoder to retrieve missing channels, follow these steps:
Step 1: Factory Reset
1. **Power On** the SuperBox decoder.
2. **Access the Menu**: Use the remote control to navigate to the settings menu. This is usually accessed by pressing the “Menu” or “Settings” button on the remote.
3. **Factory Reset**:
– Look for the option that says “System,” “Settings,” “Advanced,” or something similar.
– Find and select the “Factory Reset” option.
– You may be prompted to enter a password or PIN. If you haven’t changed it, the default PIN is often `0000`, `1234`, or can be found in the user manual.
– Confirm the reset. The device will restart and restore to its original factory settings.
Step 2: Rescan for Channels
1. **Open the Menu** again after the reset.
2. **Channel Setup**:
– Navigate to the “Installation,” “Channel Setup,” or “Tuning” section.
– Select “Auto Scan,” “Auto Tuning,” or “Automatic Search.”
3. **Start Scan**:
– Start the scanning process. The decoder will search for all available channels. This process may take a few minutes.
– Once the scan is complete, it will save all found channels.
Additional Tips:
– **Ensure Connections**: Before starting, make sure that all cables (antenna, power, etc.) are securely connected.
– **Update Firmware**: Check if there is a firmware update available for your SuperBox decoder. Updating the firmware can sometimes resolve channel issues.
– **Manual Scan**: If certain channels are still missing, you can try a manual scan. Enter the frequency of the missing channels if you know them.
Troubleshooting:
– **Check Signal Strength**: Poor signal strength can cause channels to be missed. Ensure your antenna is correctly positioned.
– **Consult Manual**: Refer to the user manual for specific instructions related to your model.
– **Contact Support**: If the problem persists, contact SuperBox customer support for further assistance.
By following these steps, you should be able to reset and rescan your ReScan SuperBox decoder to retrieve any missing channels.
