How To Scan Nigcomsat MBC Channels On Qsat Decoder
The Video Below Illustrates How To Scan Nigcomsat MBC Channels On Qsat Decoder :
Scanning Nigcomsat MBC channels on a Qsat decoder involves a series of steps to ensure the decoder is correctly set up to receive signals from the Nigcomsat satellite. Here’s a step-by-step guide:
1. **Connect Your Decoder**:
– Ensure your Qsat decoder is properly connected to your TV and satellite dish.
– Power on the decoder and the TV.
2. **Access the Menu**:
– Use the remote control to navigate to the main menu of the Qsat decoder.
3. **Satellite Configuration**:
– Find and select the “Installation” or “Setup” menu.
– Choose the “Satellite List” or similar option.
– Add or select the Nigcomsat satellite (42.5°E).
4. **Antenna/LNB Setup**:
– Go to the “Antenna Setup” or “LNB Configuration” menu.
– Configure the LNB settings based on your satellite dish’s specifications:
– LNB Frequency: Typically 5150 or 5750 (verify the correct frequency for your LNB type).
– DiSEqC settings: Set according to your switch configuration if you are using one.
– Ensure the polarity and other settings match the requirements for Nigcomsat.
5. **Add Transponder**:
– Access the “Transponder List” or similar menu.
– Add the transponder details for Nigcomsat MBC channels:
– Frequency: 12518 MHz
– Symbol Rate: 29500 KS/s
– Polarization: Horizontal (H)
6. **Scan for Channels**:
– Select the option to scan or search for channels.
– Choose either “Blind Scan” for a thorough search or “Manual Scan” if you entered specific transponder details.
– Start the scan process and wait for it to complete.
7. **Save and Exit**:
– After the scan is complete, save the found channels.
– Exit the menu and return to normal viewing.
8. **Channel Verification**:
– Navigate through the channels to verify if the Nigcomsat MBC channels are successfully scanned and available.
If you encounter any issues during the scanning process, ensure:
– The satellite dish is correctly aligned to Nigcomsat at 42.5°E.
– All cable connections are secure.
– The LNB is functioning properly.
Refer to your Qsat decoder manual for any specific instructions or troubleshooting steps tailored to your model.
